Select country
Contact us
fluidity.nonstop fluidity
fluidity.nonstop
Centrifugal Pumps

Centrifugal Pumps

Centrifugal pumps are a highly effective and reliable pumping solution. They convert input power into kinetic energy by an impeller rotating in the chamber. There are several pump chamber and impeller designs suitable for a wide range of applications, from unloading and transferring fluids to hygienic processes such as pumping milk and beer. These pumps are relatively inexpensive to purchase and run and are resistant to abrasive and corrosive liquids. AxFlow provides centrifugal pumps and accessories for a wide range of industries and applications with experts that can provide guidance on selection and installation.

40 series from 11 manufacturers

Reset Filter

Do you need help finding the right pump that meets your needs?

We have experienced experts who are reay to help you!

Get in touch here

 How does a centrifugal pump work? 

A centrifugal pump converts input power into kinetic energy by an impeller rotating in the chamber. Fluid enters the inlet and is pulled in by centrifugal force. As the velocity increases, the pressure is converted to a higher pressure and velocity, and is discharged from the chamber. The effectiveness of the pump is due to the interaction of the chamber and impeller. 
                                               

Operating elements 

The principle elements of the centrifugal pump are the pump chamber and the impeller, and is available in axial flow, radial flow, mixed flow and side channel versions. 

Pump chambers 

The design of the pump chamber determines the direction of the fluid flow through the pump.  

Pump chambers are classified as volute, diffuser and vortex. 

  • Volute: The impeller is offset in the housing. 
  • Diffuser: The fluid is forced out by the impeller through a series of curved vanes on the inside of the chamber wall. 
  • Vortex: The pump does not generate a centrifugal force as the impeller is recessed in the chamber and therefore outside the flow region of the volute. 

The design of the impeller dictates what fluids can be moved through the pump chamber. The combination of these two elements provides a highly effective pumping solution for the widest number of applications. 

Types of impellers 

There are three main impeller options: fully open, semi-open and closed. 

  • Fully open impellers are essentially a set of vanes mounted on the pump shaft. This simple design allows solids to pass though the pump without choking the impeller., 
  • Semi-open impellers are fitted with a back plate, which adds strength to the impeller. The fluid entering the pump does not pass through the eye, but between the casing and the vanes. 
  • Closed impeller uses vanes that are contained inside two discs or shrouds. These impellers are used in radial flow pumps for both single double inlet configurations. 

Less common are the vortex, screw and chopper impellers. These are variations based on open and semi-open impellers and have been developed to meet more specialised applications where aggressive slurries and solids are involved. 

Single stage, double stage and multi-stage pumps 

  • Single Stage: The single stage pump contains just one impeller. This pump has been developed for use in both vertical and horizontal configurations. 
  • Double Stage: The double stage pump has a pair of impellers mounted back-to-back on a common shaft inside a single volute. 
  • Multistage: Multistage pumps contain several impellers connected in series in order to deliver high fluid pressure at each stage. 

Radial, axial and mixed flow designs 

  • Radial flow: The fluid is pumped in a radial direction through the impeller from the centre to the tips of the unpitched blades. This causes the fluid to be discharged at right angles to the shaft. 
  • Axial flow: The pump has an inlet diameter larger than the impeller diameter that pushes the fluid along the axis of the shaft. 
  • Mixed flow: The fluid flow can be described as being between axial and radial. Simply put, mixed flow design combines the characteristics of radial flow and axial flow pumps. 

Magnetic drive pumps 

The exception to the general centrifugal pump design is the magnetic drive pump. In this design, the rotating shaft is encompassed entirely within the pump chamber and driven by rotating magnets in the pump casing driven by an external motor. This ensures that the pump chamber is completely sealed, preventing any leakage to atmosphere as there are no shaft seals. 

Benefits of centrifugal pumps 

The centrifugal pump is more efficient and reliable than a positive displacement pump and is designed to provide both high and low flows at high and low pressures. Some of the main benefits of centrifugal pumps are: 

  • Relatively inexpensive pump to purchase and run. 
  • Easy to maintain thanks to its simple design, resulting in a long working life and low life-cycle cost.  
  • Efficient at handling low viscosity fluids. 
  • Resistant to abrasive and corrosive liquids. 
  • Smooth fluid flow. 

The downsides of centrifugal pumps are that not all versions are self-priming and, due to high shear forces, they are not very well-suited for high viscosity fluids or gentle products. At or above 300 mPas the efficiency rate quickly diminishes. While the pump can be run at this viscosity it is not sustainable.  

Where they have the edge over other pump types is that they can satisfy the widest spectrum of applications across many industries. 

Applications 

Centrifugal pumps can be used from unloading and emptying containers to transferring and circulating fluids. As the pump is more efficient at handling low viscosity fluids, it is primarily used and suitable for transferring fluids  such as water, light oils, glycol, fuels, chemicals, and certain types of slurries. They are especially well-suited for handling and transporting water, paints and surface coatings, food, beverages, pharmaceuticals, and abrasive liquids. 

Hygienic applications 

Hygienic stainless steel centrifugal pumps are designed to safely and efficiently pump liquids in food and beverage production such as pumping milk, fruit juices, soft drinks and beer. Additives such as aroma, glucose and oils are also conveyed with centrifugal pumps.  

Hygienic centrifugal pump with 3-A, FDA and EU1935/2004 certifications have special construction properties: 

  • Hygienic centrifugal pumps work with special shaft seals. 
  • The impellers have a geometry with high efficiency. 
  • The housings of the centrifugal pumps for hygiene processes are designed without dead spaces, so that the pumps can be easily cleaned. 
  • Cleaning-In-Place (CIP) and Sanitizing-In-Place (SIP) processes cleans and disinfects the pump without the need for disassembly and assembly. 

In addition, manufacturers in the food, pharmaceutical, cosmetics and chemical industries use hygienic centrifugal pumps to convey extracts, emulsions and ultrapure water. 

Industrial applications 

Industrial pumps come in various sizes and types, making it important to choose the right technology and design for the application. For instance, monoblock centrifugal pumps made of cast iron with stainless steel shafts are suitable for water supply and pumping of industrial service water, while open impellers and stainless steel material for the pump housing and impeller offer greater chemical resistance. Multistage centrifugal pumps can be used to increase water system pressure, with angled connections for easier integration into existing systems. Care should be taken to ensure an appropriate output size, as overly large pumps can become expensive due to the motor's energy requirements. 

Commercial applications 

Centrifugal pumps are used in a variety of commercial and private sector application including:  

  • Self-priming jet pumps for irrigation and horticulture. 
  • Multistage well pumps for water production. 
  • Submersible pumps with float switches for emptying rainwater tanks. 
  • Submersible pumps with integrated shredders for pumping out pits containing dirty water. 

Important considerations when selecting the right pump 

When selecting the right pump, the application should determine the most suitable pump type. Parameters such as delivery volume and pressure, temperature, flow characteristics, vapor pressure, solids content, corrosiveness, toxicity, and hygiene determine the most suitable pump. It is also essential to choose the correct impeller and impeller size for the application. All impellers come with their own advantages and disadvantages, have different operational efficiencies and are suitable for different applications and fluids. Fully open impellers are designed to reduce wear and potential blockages, while semi-open impellers are easy to clean and handle challenging fluids containing fibrous materials, grits and slurries. Closed impellers, on the other hand, are good for gaseous products, clean or thin fluids that do not contain solids and/or aggressive fluids. 

Why choose AxFlow? 

AxFlow offers centrifugal pumps and accessories for the widest range of industries and applications. AxFlow’s objective is to always ensure that supplied centrifugal pumps meet customers’ requirements and expectations. Do you need support in selecting the right pump for your needs? Do not hesitate to get in touch. AxFlow’s experts and engineers can provide guidance through the complexities of centrifugal pumps, from selection and specification to equipment installation and follow-up support. 

Eoin Cahill
Water & Wastewater, Power generation, Construction & Mining
Brian Coleman
Food & Beverage Sectors.
Brajan Saraci
Pharmaceutical, BioPharma, Chemical and Petrochemical Sectors
Product inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Solids Character
Product Shall Be
Special Requirements
Service inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Service type
Literature request

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

The literature I need
Spare part inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Contact information
I accept that info will be stored in AxFlow database and CRM Website Policy
An error has occurred while getting captcha image