FLUX F424, F425, F426, F427, F430 Barrel And Container Pumps

Description

F424, F425, F426, F427, F430 - Barrel and container Pumps The specialists for liquid transfer out of barrels and containers. Suitable for thin, neutral, corrosive or high flammability liquids. Successfully used in almost every industry all over the world! Whenever liquids are pumped out of a barrel or container, FLUX can supply a unit of unsurpassed quality: all FLUX pumps are available in different materials. You can choose between a pump with a mechanical seal or a sealless version. One of the unique features of both, the Polypropylene and the PVDF mechanical seal version, is the steel cored inner tube providing, through increased lateral stability, a longer service life. Both, mixed centrifugal and axial impellors are available to suit differing head and flow applications. And if you want to combine the pumping and mixing operation FLUX also have the pump you need. Another feature is the FLUX quick assembly system. This allows for simple and speedy pump strip down. Of course, FLUX pumps require a powerful and reliable drive motor. A wide range of electric or compressed air motors provides a matched power unit throughout the pump range – even in hazardous locations or when pumping highly flammable liquids. To complete the comprehensive FLUX program, a wide range of top class accessories is available – from protection against emission of noxious vapours through to the volumetric measurement of liquids. F424 – The sealless Flux Pump

Features and benefits:

· particularly suitable for transferring solvents and other fluids that do not glue, nor crystallize

· safe dry running of the drum pump

· no wear on seals inner tube and helix shaped support bearings completely self-draining - thus preventing from any mixtures of liquids being pumped.

· no contamination of the liquid being pumped by shaft lubricants

· optimum barrel emptying due to ideal impellor design

· to be stripped for cleaning with a minimum of effort

· version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4108 X

F425 – For emptying Barrels up to 99.98%

Features and benefits:

· remains of less than 0,05 l

· especially recommended for high-grade fluids (like e.g. used in cosmetic industry)

· optimum use of the liquid in barrel emptying, thus avoiding expenditures nd/or cost in disposal

· ease of handling

· to be stripped for cleaning with a minimum of effort

· version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 X

F426 – The Flux Mixing Pump

Features and benefits:

· suitable for pumping and/or mixing of almost every fluid (e.g. water-based paints)

· with reliable mechanical seal

· optimum barrel emptying due to ideal impellor design

· to be stripped for cleaning with a minimum of effort

· light and handy design - version in stainless steel without additional mixing collar

· version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4109 X

F427 – The Flux Sanitary Pump

Features and benefits:

· all wetted parts are made of stainless steel, ETFE or PTFE

· to be stripped for cleaning and/or sterilization with a minimum of effort

· no contamination of the liquid being pumped by shaft lubricants

· optimum barrel emptying due to ideal impellor design

· also available in 3A version

F430 – The Flux pump with Mechanical seal

Features and benefits:

· unique barrel pump design in PP and PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures

· sealed inner tube, the liquid being pumped cannot enter the inner tube

· suitable for transferring almost every low viscosity fluid

· optimum barrel emptying due to ideal impellor design

· to be stripped for cleaning with a minimum of effort

· version in stainless steel and Hastelloy C tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 – EC-Type-Examination Certificate No. PTB 00 ATEX 4110 X

F430 – PP100/50 – For High delivery Heads

Features and benefits:

· powerful, extremely light and handy pump

· particularly suitable for emptying 1000-Litre-Containers

· no floor drains, minimizing leakage risks